Why is the one-way Roller pin Bearing important?

The bearing capacity of one-way Roller pin Bearing is a problem that many manufacturers attach great importance to when choosing Bearing products. When installing, pay attention to Bearing the product to bear the force is huge. Bearing products now have a higher capacity in terms of load, and the capacity is increasing. How much load does the one-way Roller pin Bearing need? Let's give you a brief introduction.

Load has always been a very important issue for Bearing products. One-way Roller pin Bearing is expected. In mechanical operations, high loads of products are required. It is required to face the environment, shock and vibration during operation. A good Bearing lubricant is very important to Bearing, and it is also an important link.

One-way Roller pin Bearing is very popular with customers. During operation, the friction torque is reduced, and lower working temperature, lower power and lubricating oil consumption can be used, so that it not only runs well, but also is supported by the majority of users.

What effect does one-way Roller pin BearingRoller pin shedding have on the machine?

The Roller pin of the one-way Roller pin Bearing falls off, which is undoubtedly a terrible thing for every manufacturer using this equipment. For each product, if a small part of the one-way Roller pin Bearing is the missing part of the heart, can it still work? Of course, the early coordination problem is not big, but Bearing the problems of life and load gradually accumulate, these problems will gradually enlarge in the future, thus deeply affecting every equipment of the company.

The rolling of the one-way Roller pin Bearing is very dangerous for the machine. Small aspects may cause the equipment to stop running for a short time or the machinery to run poorly. One of the reasons why the one-way Roller pin BearingRoller pin falls off is probably that the cage is damaged, and the operation of the Bearing affects the entire equipment. It only shows the importance of the one-way Roller pin Bearing. Second, companies need to be prepared to reach out to suppliers. In the process of contacting the supplier, it is necessary to explain the situation clearly and require matching products and corresponding models to avoid more problems.

Precautions for installation of one-way Roller pin Bearing:

1. For clearance fit, it is recommended to apply a thin layer of anti-creep corrosion agent on the mating surface to prevent friction corrosion between the mating surfaces.

2. During the installation process, the force exerted on the Bearing must not be transmitted from one Bearing ring to another Bearing ring through the rolling elements, otherwise the raceway may be damaged. However, under no circumstances can the Bearing ferrule, cage, Roller or seal be struck directly.

3. First place the eccentric sleeve on the eccentric step of the inner sleeve of the Bearing, and then tighten it by hand along the rotating shaft. Insert a small iron rod into or against the counterbore of the eccentric sleeve. Use a hammer to knock the small iron bar along the rotation axis to make the eccentric sleeve firmly installed. Lock hexagon socket head screw on the eccentric sleeve.

4. Do not tighten the bolts that fix the Bearing seat first, so that the Bearing sleeve can rotate in the Bearing seat. Then tighten the Bearing seat bolts.