The service life of one-way Roller pin Bearing is affected by these three factors

单向Roller pin BearingThere are many external factors, such as improper installation and maintenance. Let's share with you what factors will affect it.单向Roller pin BearingThe service life.

1,installation factor analysis

For example, the conveyor roller Bearing seat gland installation. The sealing installation of the Bearing seat is an important factor affecting the performance of the Bearing. The installation of the Bearing gland directly affects the radial clearance of the Bearing. If the Bearing gap is too small, the Bearing will overheat, aggravate the wear of the Bearing, and the wear resistance of the Bearing will not be exerted. It can also cause the Bearing to get stuck. Therefore, before installing the gland, the entire gland position of the highland barley paper should be used correctly.单向Roller pin BearingSeat sealThe installation quality of (skeleton oil seal) affects the corrosion rate of the Bearing.单向Roller pin BearingSeat works in a water-rich environment and the seal is damaged during installation. Improper installation will cause iron oxide impurities in the Bearing water, which will accelerate the corrosion of Bearing parts. When installing the skeleton oil seal, avoid mechanical damage, and the lip should face the outside of the Bearing seat.

2,Bearing maintenance factors

For example, the maintenance of conveyor rollers can be divided into daily maintenance, operation inspection, troubleshooting, etc.

单向Roller pin BearingThe operation inspection is mainly to detect the temperature of the Bearing seat. The temperature of the roller table Bearing seat before and after the general rolling line isAbout 4O ℃. Even on the Bearing cage, the temperature rise of the Bearing seat will not exceed 43~45 ~ C in the early stage of rolling element wear. But单向Roller pin BearingFurther wear and inclusion of internal parts, the temperature of the Bearing seat will rise4550 ~ C, the bearing capacity of the rolling body becomes more uneven, and even cracks and dislocations. Once the rolling body is broken or misplaced, the temperature rise of the Bearing seat will rise sharply, accompanied by smoke from the Bearing seat. When the Bearing is stuck, the temperature of the temperature measuring point of the Bearing seat will rise to 150 ℃ to 170 ℃. At this point,单向Roller pin Bearinghas been completely scrapped. In order to extend单向Roller pin BearingIn the early stage of Bearing wear, the Bearing should be cleaned in time, the grease should be replaced, the position of the Bearing seat gland should be readjusted, and the thickness of the gasket should be appropriately increased or decreased to extend the service life of the Bearing.

3,Environmental factors

Although单向Roller pin BearingThe operating environment of the board production line is complex, such as heavy load, high speed, excessive water accumulation, etc.单向Roller pin BearingThe service life of the board, but we can still continue to work hard to improve the site and create a better environment for Bearing to extend the service life of the Bearing.

单向Roller pin BearingIt is a highly standardized precision mechanical component produced by a specialized factory. in many influences单向Roller pin BearingAmong the economic and technical indicators, the life index is a direct reflection of Bearing quality. Although people have made accurate and perfect considerations from the design to the overall structural design, sometimes the service life of the Bearing will be greatly shortened due to the neglect of uncertainty or some external factors. Through a series of investigations, according to a large number of background materials. Analyze data and failure forms to find out单向Roller pin BearingThe main reasons for the failure, put forward targeted improvement measures to extend the service life of the Bearing.